Fault Reconstruction for Multiple Failure Modes Based on Threshold Fault Subspace Extraction Algorithm

Abstract

Abstract:

Abstract： This paper considered the fault detection and reconstruction problem for multiple types of sensor failures in a unified framework. The multiple failure modes pose a challenge to performance monitoring and fault reconstruction. First, a fault model was proposed to represent the existence of additive and multiplicative sensor faults in a single framework. From a data-driven perspective, both necessary and sufficient conditions for fault detectability were derived using Rayleigh-Ritz lemma. Additionally, a data-driven fault reconstruction approach based on threshold fault subspace extraction algorithm was proposed. The proposed fault reconstruction method demonstrates superiority over the traditional method in terms of reconstruction errors. Numerical simulations fully verify the main results.

Key words:multiple failure modes,fault detection,fault reconstruction,threshold fault subspace extraction

NING Chao,CHEN Maoyin,ZHOU Donghua. Fault Reconstruction for Multiple Failure Modes Based on Threshold Fault Subspace Extraction Algorithm[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 780-785.

References

［1］Qin S. Statistical process monitoring: Basics and beyond［J］. Journal of Chemometrics, 2003, 17(89): 480502.

［2］Cheng C, Hsu C, Chen M. Adaptive kernel principal component analysis (KPCA) for monitoring small disturbances of nonlinear processes［J］. Industrial & Engineering Chemistry Research, 2010, 49(5): 22542262.

［3］Ning C, Chen M, Zhou D. Hidden Markov model based statistics pattern analysis for multimode process monitoring: An indexswitching scheme［J］. Industrial & Engineering Chemistry Research, 2014, 53(27): 1108411095.

［4］Zhou D, Li G, Qin S. Total projection to latent structures for process monitoring［J］. AIChE Journal, 2010, 56(1): 168178.

［5］Qin S. Survey on datadriven industrial process monitoring and diagnosis［J］. Annual Reviews in Control, 2012, 36(2): 220234.

［6］Ge Z, Song Z, Gao F. Review of recent research on databased process monitoring［J］. Industrial & Engineering Chemistry Research, 2013, 52(10): 35433562.

［7］Yue H, Qin S. Reconstructionbased fault identification using a combined index［J］. Industrial & Engineering Chemistry Research, 2001, 40(20): 44034414.

［8］Alcala C, Qin S. Reconstructionbased contribution for process monitoring［J］. Automatica, 2009, 45(7): 15931600.

［9］Qin S, Zheng Y. Qualityrelevant and processrelevant fault monitoring with concurrent projection to latent structures［J］. AIChE Journal, 2013, 59(2): 496504.

［10］Hao H, Zhang K, Ding S, et al. A datadriven multiplicative fault diagnosis approach for automation processes［J］. ISA Transactions, 2014, 53(5): 14361445.

［11］Horn R, Johnson C. Matrix analysis［M］. ［s.l.］: Cambridge University Press, 2012.

［12］Li G, Qin S, Zhou D. Output relevant fault reconstruction and fault subspace extraction in total projection to latent structures models［J］. Industrial & Engineering Chemistry Research, 2010, 49(19): 91759183.

[1]	FENG Liwei, SUN Liwen, GU Huan, LI Yuan.Industrial Process Fault Detection Based on Incremental Isometric Mapping and Double Local Density Method[J]. Journal of Shanghai Jiao Tong University, 2024, 58(4): 525-533.
[2]	LI Yuan, YAO Zongyu.Principal Polynomial Nonlinear Process Fault Detection Based on Neighborhood Preserving Embedding[J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 1001-1008.
[3]	HE Xiawei, CAI Yunze, YAN Lingling.A Combined Residual Detection Method of Reaction Wheel for Fault Detection[J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 716-728.
[4]	LIU Ziwen (刘子文), XIAO Lei (肖雷), BAO Jinsong (鲍劲松), TAO Qingbao (陶清宝) .Bearing Incipient Fault Detection Method Based on Stochastic Resonance with Triple-Well Potential System[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 482-487.
[5]	LIU Mingguang, LIAO Yaxuan, LI Xiangshun .Data-Driven Fault Detection of Three-Tank System Applying MWAT-ICA[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(5): 659-664.
[6]	DAI Cong, LIU Yongzhi, SUN Haoshui .Fault Reconstruction for Lipschitz Nonlinear Systems Using Higher Terminal Sliding Mode Observer[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 630-638.
[7]	XU Qiaoning,AI Qinglin,DU Xuewen,LIU Yi.An Integrated Model-Based and Data-Driven Method for Early Fault Detection of a Ship Rudder Electro-Hydraulic Servo System[J]. Journal of Shanghai Jiaotong University, 2020, 54(5): 451-464.
[8]	HUANG Jian, YANG Xu.Online Weighted Slow Feature Analysis Based Fault Detection Algorithm[J]. Journal of Shanghai Jiao Tong University, 2020, 54(11): 1142-1150.
[9]	PENG Rui (彭锐), MA Xiaoyang *(马晓洋), ZHAI Qingqing (翟庆庆), GAO Kaiye (高凯烨).Software Reliability Growth Model Considering First-Step and Second-Step Fault Dependency[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 477-479.
[10]	Tian Z.; Jia Y.; Li X.; Wang P..Modelling upgrading maintenance policy in the one-dimensional renewing warranty period[J]. J Shanghai Jiaotong Univ Sci, 2016, 21(6): 737-743.
[11]	LIU Xiaodong,ZHONG Maiying,LIU Hai.EKF-Based Fault Detection of Unmanned Aerial Vehicle Flight Control System[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 884-888.
[12]	CHU Zhenzhong1,ZHU Daqi1,ZHANG Mingjun2.Terminal Sliding Mode Observer Based Fault Reconstruction for Underwater Vehicle Thruster[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 837-841.
[13]	GUO Tianxu，CHEN Maoyin，ZHOU Donghua.A Fault Detection Method of Non-Gaussian Processes and Small Shift[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 775-779.
[14]	CONG Ya,GE Zhiqiang,SONG Zhihuan.Multi-Rate Principle Component Analysis for Process Monitoring[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 762-767.
[15]	LIU Yang,HE Xiao,ZHOU Donghua.Fault Detection for a Class of Closed-Loop Systems with Distributed Measurements[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 757-761.