Vibration-Related Fault Diagnosis in Cold Rolling Mill by Using EEMD and SVM

Abstract

Abstract:

Abstract： By analyzing the vibration process of cold rolling and using the structure model of the rolling system, a dynamic rolling force of the rolling vertical system was built, with the consideration of the influence of rolling vibration. A data-driven fault diagnosis was proposed based on industrial field data by using ensemble empirical mode decomposition (EEMD) and support vector machine (SVM), with the focus on the generalized fault, which were mostly caused by variations of process parameters under complex working conditions. According to the decoupling effect on measured rolling force data with the EEMD algorithm, the intrinsic mode function (IMF) component was defined as fault eigenvector and chosen as the input into the classifier of vector machine. Then, the vibration-related fault of cold rolling mills could be diagnosed by the distinction between the normal state and the fault state by SVM.

Key words:rolling mill,vertical vibration,fault diagnosis,support vector machine(SVM),signal ,processing

CLC Number:

TP 273

YANG Xu1,PENG Kaixiang1,LUO Hao2,KRUEGER Minjia2,ZONG Dazi1,DING Steven X2. Vibration-Related Fault Diagnosis in Cold Rolling Mill by Using EEMD and SVM[J]. Journal of Shanghai Jiaotong University, 2015, 49(06): 751-756.

References

［1］邹家祥, 徐乐江. 冷连轧机系统振动控制［M］. 北京：冶金工业出版社, 1998.

［2］Niroomand M R, Forouzan M R, Salimi M, et al. Experimental investigations and ALE finite element method analysis of chatter in cold strip rolling ［J］. ISIJ International, 2012, 52(12): 2245.

［3］Ginzburg V B. Flatrolled steel processes: Advanced technologies［M］. Boca Raton: CRC Press, 2009.

［4］Yang X, Li Q, Tong C N, et al. Vertical vibration model for unsteady lubrication in rollsstrip interface of cold rolling mills ［J］. Advances in Mechanical Engineering, 2012, Article ID 734510.

［5］Zhao H Y, Ehmann K F. Stability analysis of chatter in tandem rolling millsPart 1: Singleand multistand negative damping effect ［J］. Journal of Manufacturing Science and Engineering, 2013, 135:18.

［6］Yang X, Tong C. Coupling dynamic model and control of chatter in cold rolling ［J］. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 2012, 134(4): 18.

［7］Ding S X. Modelbased fault diagnosis techniques ［M］. Second Edition. Berlin: Springer, 2013.

［8］Chen J, Patton R J. Robust modelbased fault diagnosis for dynamic systems ［M］. Boston: Kluwer Academic Publishers, 1999.

［9］Kano M, Nakagawa Y. Databased process monitoring, process control and quality improvement: Recent developments and applications in steel industry ［J］. Computers and Chemical Engineering, 2008, 32(12): 1224

［10］Ding S X. Datadriven design of monitoring and diagnosis systems for dynamic processes: A review of subspace technique based schemes and some recent results ［J］. Journal of Process Control, 2014, 24: 431449.

［11］周东华, 胡艳艳. 动态系统的故障诊断技术［J］. 自动化学报, 2009, 35(6): 748758.

ZHOU Donghua, HU Yanyan. Fault diagnosis techniques for dynamic systems ［J］. Acta Automatica Sinica,2009,35(6): 748758.

［12］.杨旭, 童朝南,孟建基，等. 冷板带轧机含振动因素的轧制力模型［J］. 振动、测试与诊断, 2010, 30(4): 422428.

YANG Xu, TONG Chaonan, MENG Jianji, et al. Mathematical model of rolling force in the analysis of cold rolling chatter ［J］. Journal of Vibration, Measurement and Diagnosis, 2010, 30(4): 422428.

［13］Lei Y G, He Z J, Zi Y Y. Application of the EEMD method to rotor fault diagnosis of rotating machinery ［J］. Mechanical System and Signal Processing, 2009, 23(2): 13271338.

［14］Peng Z K, Tse P W, Chu F L. A comparison study of improved HilbertHuang transform and wavelet transform: application to fault diagnosis for rolling bearing ［J］. Mechanical Systems and Signal Processing, 2005, 19(5): 974988.

［15］万鹏, 王红军, 徐小力. 局部切空间排列和支持向量机的故障诊断模型［J］. 仪器仪表学报, 2012, 33(12): 27892795.

WAN Peng, WANG Hongjun, XU Xiaoli. Fault diagnosis model based on local tangent space alignment and support vector machine ［J］. Chinese Journal of Scientific Instrument,2012, 33(12): 27892795.

［16］张周锁, 李凌均, 何正嘉. 基于支持向量机的机械故障诊断方法研究［J］. 西安交通大学学报, 2002, 36(12): 13031306.

ZHANG Zhousuo, LI Lingjun, HE Zhengjia. Research on diagnosis method of machinery fault based on support vector machine ［J］. Journal of Xi’an Jiaotong University, 2002, 36(12): 13031306.

[1]	PAN Meiqi, HE Xing.A Fault Diagnosis Method for Wind Turbines Based on Zero-Shot Learning[J]. Journal of Shanghai Jiao Tong University, 2025, 59(5): 561-568.
[2]	Xiao Wenbo, Xiong Jiakai, Yu Lesheng, He Yinshui, Ma Guohong.Weld Defect Monitoring Based on Two-Stage Convolutional Neural Network[J]. J Shanghai Jiaotong Univ Sci, 2025, 30(2): 291-299.
[3]	MA Xiaolong, XU Xinpeng, REN Shulei, LI Chen, CUI Shan.Architecture Design of Guidance Head Signal Processing Module Based on GP-GPU Technology Application[J]. Air & Space Defense, 2025, 8(2): 84-92.
[4]	XUE Guiting, LIU Zhe, HAN Zhaoru, SHI Fang, WANG Ti, WANG Xiao.Switching Modeling and Application in Fault Diagnosis Algorithm Testing of Distribution Network[J]. Journal of Shanghai Jiao Tong University, 2024, 58(9): 1381-1389.
[5]	GANJIKUNTA Ganesh Kumar^∗, MOHAMMED Mahaboob Basha, SIBGHATULLAH Inayatullah Khan.Energy Efficient FIR Filter Design Using Distributed Arithmetic[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(6): 1023-1027.
[6]	LI Zhiqiang, XU Bin, LIN Nan, WANG Yichong, FAN Genlian, TAN Zhanqiu, ZHANG Di.Research Progress of Advanced of High Modulus and Ductile CNT/Al Composites[J]. Air & Space Defense, 2024, 7(6): 29-37.
[7]	ZHANG Chunmei, XU Xingque, LIU Silin.Distribution Network Fault Diagnosis Technology Based on Multi-Source Data Fusion[J]. Journal of Shanghai Jiao Tong University, 2024, 58(5): 739-746.
[8]	WANG Huoping, LUN Yuguo, WANG Deyang, XIAO Wangsui, PENG Yijin.The Application Risk and Control Measures of S420 Ultra High Strength Steel in Deep Water Jacket[J]. Ocean Engineering Equipment and Technology, 2024, 11(4): 47-52.
[9]	HUANG He, HU Kaiyi, YANG Lan, WANG Hao, GAO Tao, WANG Huifeng.FPGA Design of Image Defogging System in Intelligent Tachograph[J]. Journal of Shanghai Jiao Tong University, 2024, 58(4): 565-578.
[10]	ZHANG Baolei1, WU Yuke2, TANG Yufeng2.Fault Diagnosis of Electric Slip Ring of EPSO Single Point Mooring Base on CART Decision Tree[J]. Ocean Engineering Equipment and Technology, 2024, 11(2): 95-100.
[11]	GU Wen (顾闻), XU Yi∗ (徐奕).Retinal Vessel Segmentation via Adversarial Learning and Iterative Refinement[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(1): 73-80.
[12]	ZHANG Zelong, ZHANG Yingchao, WU Bo, DONG Wei, FAN Youben.Real-Time Laser Speckle Imaging of Blood Flow with High Gray Level and High Resolution[J]. Journal of Shanghai Jiao Tong University, 2023, 57(5): 552-559.
[13]	HUANG He, HU Kaiyi, LI Zhanyi, WANG Huifeng, RU Feng, WANG Jun.An Image Dehazing Method for UAV Aerial Photography of Buildings Combining MCAP and GRTV Regularization[J]. Journal of Shanghai Jiao Tong University, 2023, 57(3): 366-378.
[14]	SHEN Hong, REN Haodong, LI Haidong.Laser Bionic Manufacturing Technology for Functional Surface[J]. Air & Space Defense, 2023, 6(2): 12-27.
[15]	GUO Junfeng, WANG Miaosheng, WANG Zhiming.Fault Diagnosis of Rolling Bearing with Roller Spalling Based on Two-Step Transfer Learning on Unbalanced Dataset[J]. Journal of Shanghai Jiao Tong University, 2023, 57(11): 1512-1521.