A Hyperelastic Constitutive Model for Membrane and Its Application in Air Cushion

Abstract

Abstract:

In order to accurately describe the mechanical behavior of air cushion in finite element analysis，a constitutive model for polymer membrane was developed and applied to study the cushioning properties of air cushion. Based on uniaxial tensile tests of the polymer film, a compressible hyperelastic constitutive model was proposed. Material parameters were obtained by curve fitting. The model was validated by implementing numerical simulations on compression test of one column of the air cushion. Comparisons between simulation results and experimental data show that the proposed hyperelastic model can effectively characterize the nonlinear material behavior of the polymer membrane. The model was further applied to analyze the influence of inflation pressure on the performance of the air cushion. The development of the hyperelastic constitutive model is critical to the numerical simulation and design optimization of air cushion packaging.

Key words:air cushion,polymer membrane,heperelastic,constitutive model,finite element analysis

CLC Number:

TB 125

CHEN Ming1,PENG Xiongqi1，SHI Shaoqing2,YANG Huazheng3. A Hyperelastic Constitutive Model for Membrane and Its Application in Air Cushion[J]. Journal of Shanghai Jiaotong University, 2014, 48(06): 883-887.

References

［1］任冬远. 空气垫在受到跌落冲击时的缓冲机理及性能研究［D］. 无锡：江南大学机械工程学院, 2008.

［2］赵德坚.充气量对充气缓冲包装垫缓冲性能的影响研究［J］.包装工程，2011,32(13):3234.

ZHAO Dejian. On influence of gas volume on cushioning property of air cushion［J］. Packaging Engineering, 2011, 32(13):3234.

［3］Chen M R, Zhang J F. Optimal design of cushion package for airdrop system［J］. Applied Mechanics and Materials, 2012, 200:617620.

［4］Gunawan F. Numerical modelling and experimental verification of airbag for packaging material application［J］. International Journal, 2012,7(1):6468.

［5］Wang J, Chen J L, Ji H W. Numerical analysis for loadbearing capacity and cushioning performance of structural unit of molded pulp product［C］//2011 International Conference on Electric Information and Control Engineering. Wuhan: IEEE Computer Society, 2011: 33873390.

［6］Liu C, Zhang L, Shen X. CAD Applications of constitutive model of foamed cushioning materials［J］. Packaging Engineering, 2012, 33(13): 6365.

［7］MayNewman K, Lam C, Yin F C P. A hyperelastic constitutive law for aortic valve tissue［J］. Journal of Biomechanical Engineering, 2009, 131(8): 81009.181009.7.

［8］龚科家,危银涛,叶进雄.填充橡胶超弹性本构参数试验与应用［J］.工程力学,2009,26(6):193198.

GONG Kejia, WEI Yintao, YE Jinxiong. Constitutive parametric experiment of tire rubber hyperelastic laws with application［J］. Engineering Mechanics, 2009, 26(6):193198.

［9］Laprade E J, Long R, Pham J T, et al. Large deformation and adhesive contact studies of axisymmetric membranes［J］. The ACS Journal of Surfaces and Colloids, 2013, 29(5): 14071419.

［10］Pearce S. Effect of strainenergy function and axial prestretch on the bulges, necks and kinks forming in elastic membrane tubes［J］. Mathematics and Mechanics of Solids, 2012, 17(8): 860875.

［11］Kim B, Lee S B, Lee J, et al. A comparison among NeoHookean model, MooneyRivlin model, and Ogden model for chloroprene rubber［J］. International Journal of Precision Engineering and Manufacturing, 2012, 13(5): 759764.

［12］Sasso M, Palmieri G, Chiappini G, et al. Characterization of hyperelastic rubberlike materials by biaxial and uniaxial stretching tests based on optical methods［J］. Polymer Testing, 2008, 27(8): 9951004.

［13］Meunier L, Chagnon G, Favier D, et al. Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber［J］. Polymer Testing, 2008, 27(6): 765777.

［14］Ahmed A S, Computational continuum mechanics［M］. New York: Cambridge University Press,2008:144145.

［15］Hu S F, Chen X X, Li H, et al. Quasi static compression characteristic of PP/wood flour foams［J］. Polymer Materials Science & Engineering, 2012,28(11):5658.

［16］任冬远,卢立新.空气垫几何压缩模型的研究［J］.包装工程，2008,29(2):1214.

REN Dongyuan, LU Lixin. Research on the geometry modeling of airbag in static compression ［J］. Packaging Engineering, 2008,29(2):1214.

[1]	ZHAO Hong, XIE Youjun, LONG Guangcheng, LI Ning, ZHANG Jiawei, CHENG Zhiqing.Mechanical Characteristics and Stress and Strain Analysis of Concrete with Bonding Interface Under Impact Load[J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1208-1217.
[2]	LIU Jinhao, YAN Yuanzhong, ZHANG Qi, BIAN Rong, HE Lei, YE Guanlin.Centrifugal Test and Numerical Analysis of Impact of Surface Surcharge on Existing Tunnels[J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 886-896.
[3]	LIU Dasheng∗ (刘大生), YAN Guozheng (颜国正).Biomechanical Analysis of a Radial Expansion Mechanism of Intestinal Robot Coupling with Hyperelastic Intestinal Wall[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 552-560.
[4]	JIA Mizhi, XU Liming, LIN Nan, NAN Bohua, WANG Kun, CAI Deng’an, ZHOU Guangming.Structural Design and Mechanical Properties of Fissile Cover with Rebound and Reset Functions[J]. Air & Space Defense, 2022, 5(2): 8-16.
[5]	FENG Qiping (冯齐平), CHU Fengting (储沨婷), CHEN Rongjing (陈荣敬), PAN Xiaogang (潘晓岗).Effects of Mandibular Extractions with Clear Aligners:A Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 377-382.
[6]	PAN Shengxuan (潘晟轩), ZOU Diyang (邹第洋), PAN Xiaogang(潘晓岗), TSAI Tsung-Yuan (蔡宗远).Effect of Attachment on Movement Control of the Central IncisorUsing Invisible Orthodontics: In-Silico Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 383-390.
[7]	AN Qingsheng, SUN Lidong, WU Qiusheng.Design of Carbon Fiber Reinforced Composite Launch Tube[J]. Air & Space Defense, 2021, 4(2): 13-.
[8]	ZHANG Cong, JIA Dejun, LI Fanchun, XU Yitong, ZHANG Yuan.Design and Simulation of a Titanium Alloy Lattice Bone Plate for 3D Printing[J]. Journal of Shanghai Jiao Tong University, 2021, 55(2): 170-178.
[9]	WANG Wei，WANG Min，HU Juncong，BAO Yidong，JIN Xia，CHEN Wenliang.Virtual Matching Method Based on Finite Element Simulation in Automotive Panel[J]. Journal of Shanghai Jiaotong University, 2020, 54(5): 532-543.
[10]	ZHAO Yong, JI Xiaojun, DAI Ming, QI Hongli, GAO Junkai.Analysis of Transmission Power and Efficiency of Side-Mounted Inductive Power Supply System for Metal Rotary Shafts[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 273-280.
[11]	ZHOU Min, GAO Mingze, LI Chuang, WANG Liancheng.Cargo Hold Structure Optimization of Small and Medium-Sized Duplex Stainless Steel Chemical Tankers[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 340-351.
[12]	WANG Dongwei,LIU Mingxing,WU Xiao,YANG Rui,DAI Jun’an.Transient Impact Dynamics of Electronic Cabinet[J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 109-117.
[13]	MA Zhiqiang,LOU Yunfeng,LI Junjie,JIN Xianlong.Explicit Asynchronous Time Steps Parallel Computational Method for Structural Dynamics Based on Multiple Overlapping Nodes[J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1100-1106.
[14]	SHEN Jie,ZHANG Yansong.Finite Element Analysis of Weld Nugget Formation in Weld-Bonding of Three Stacks of Steel Sheets[J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 726-733.
[15]	ZHANG Shuo,YE Guanlin,ZHEN liang,LI Mingguang,CHEN Chaobin.Constitutive Model of Soft Soil After Considering Small Strain Stiffness Decay Characteristics[J]. Journal of Shanghai Jiaotong University, 2019, 53(5): 535-539.