Endoscopic Robot Based on Friction Control in Intestinal Tract

Abstract

Abstract:To improve the diagnosis ability of intestinal diseases, a colonic micro-robot was proposed, based on friction control. The friction model analyzed the factors of the intestinal friction control. Under the use of custom-built templates and adhesive polymers, some experiments on the in vitro intestinal surface investigated the influences of contact pattern and contact viscosity. Considering the frictional factors and the applied environment, a friction contact device was designed for the endoscopic robot to realize the frictional locomotion. The experimental results show that the robotic prototype can adapt the serious environments to realize the active locomotion, and the locomotion environments may also produce different influences on its active locomotion speed.

Key words:endoscopic robot,friction,intestinal tract

CLC Number:

GAO Peng-1, 2 , YAN Guo-Zheng-1. Endoscopic Robot Based on Friction Control in Intestinal Tract[J]. Journal of Shanghai Jiaotong University, 2012, 46(11): 1707-1711.

References

［1］Dario P, Hannaford B. Smart surgical tools and augmenting devices［J］. IEEE Transactions on Robotics and Automation, 2003, 19(5): 78292.
［2］Menciassi A, Quirini M, Dario P. Microrobotics for future gastrointestinal endoscopy［J］. Minimally Invasive Therapy & Allied Technologies, 2007, 16(2): 91100.
［3］Phee L, Thant Z M, Ho K Y, et al. Robotic system for noscar gastrointestinal surgery ［J］. International

Journal of Medical robot, 2008, 4: 1522.
［4］Gomes P. Surgical robotics: Reviewing the past, analysing the present, imagining the future ［J］. Robotics and ComputerIntegrated Manufacturing, 2011, 27(2): 261266.
［5］Gregersen H, Kassab G. Biomechanics of the gastrointestinal tract［J］. Neurogastroenterology & Motility, 1996, 8(4): 277297
［6］Accoto D, Stefanini C, Phee L. Measurement of the frictional properties of the gastrointestinal tract［C］∥Proc 2nd Int Conf on Tribology. Vienna：［s.n.］, 2001, 1: 153158.
［7］Li J, Huang P, Luo H T. Research on frictional experiments on micro mechanism and intestine Lubr［J］. Sealing, 2005, 13: 11922.
［8］Dodou D, Delphine G, Paul B. Intestinal locomotion by means of muco adhesive films ［C］∥IEEE International Conference on Robotics and Automation. Barcelona: ［s.n.］, 2005: 352359.
［9］Wang X N, Meng M Q. Study of frictional properties of the small intestine for design of active capsule endoscope［C］∥1st IEEE/RASEMBS International Conference on Biomedical Robotics and Biomechatronics. Pisa, Tascany, Italy: ［s.n.］, 2006.
［10］Wang K D, Yan G Z. Research on measurement and modeling of the gastro intestine's frictional characteristics ［J］. Measurement Science and Technology, 2009: MST20(2009)015803.
［11］Kim J S, Sung I H, Kim Y T, et al. Analytical model development for the prediction of the frictional resistance of a capsule endoscope inside an intestine［J］. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2007, 221(8): 837845.
［12］Dodou D, Breedveld P, Wieringa P A. Friction manipulation for intestinal locomotion minimally invasive［J］. Therapy, 2005, 14(3): 18897.
［13］Kim J S, Sung I H, Kim Y T, et al. Experimental investigation of frictional and viscoelastic properties of intestine for microendoscope application［J］. Tribology Letters, 2006, 22(2): 143149.

[1]	MA Zunnong, ZHANG Yansong, ZHAO Yixi.Mechanism and Influencing Factors of Frictional Energy Dissipation in Multilayer Ultrasonic Welding[J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 772-783.
[2]	CHEN Jianwen, WU Shanxiang, ZHANG Ruonan, CHEN Wujun, FAN Jin, WANG Mingyang.Behavior of Pull-Out and Movement Mechanisms of High-Performance Plain Weave Fabric Yarns[J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 464-473.
[3]	LIU Xucheng, GU Bo, ZENG Weijie, DU Zhongxing, TIAN Zhen.Analysis of Frictional Pressure Drop Correlations of Refrigerant Two-Phase Flow in Mini-Channel[J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1095-1107.
[4]	LI Xiaokai, ZHAO Yixi, YU Zhongqi, ZHU Baohang, CUI Junhui.Simulation Study of Aluminum Alloy Ribbed Member Spinning with Ultrasonic Vibration[J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 394-402.
[5]	JIANG Yihan, WU Jiasong, WANG Wurong, WEI Xicheng.Effect of Mold Heating on High-Temperature Friction and Wear Characteristics of Uncoated 22MnB5 Boron Steel[J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 258-264.
[6]	LIU Shiao, LIAO Chencong, CHEN Jinjian, YE Guanlin, XIA Xiaohe.Strength Properties of Saturated Sand-Structure Interface by Triaxial Test Method[J]. Journal of Shanghai Jiao Tong University, 2021, 55(11): 1371-1379.
[7]	CHEN Xia, WEN Tong, LIU Kefan, HONG Yifei .Test of Friction Parameters in Bulk Metal Forming Based on Forward Extrusion Processes[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 333-339.
[8]	YAO Laipeng, HOU Baolin, LIU Xi.Adaptive Terminal Sliding Mode Control of a Howitzer Shell Transfer Arm with Friction Compensation[J]. Journal of Shanghai Jiaotong University, 2020, 54(2): 144-151.
[9]	TAN Dun，TAO Jianfeng，CHEN Liangshen,WANG Xuyong.Impact of Vane Friction Coefficient on Cam-Rotor Motor’s Torque Performance[J]. Journal of Shanghai Jiaotong University, 2020, 54(2): 160-166.
[10]	ZHAO Yang,HUA Yixiong,ZHANG Zhinan，CHAI Xianghai.A New Blade-Casing Rubbing Model Based on Hertz Contact Theory[J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 660-664.
[11]	XU Hongchang (徐宏昌), YUAN Zhiyuan *(袁志远), PAN Haoxing (潘浩星).Experimental Analysis and Optimization of Timing Belt Guide Plate Material on Engine Operational Friction Loss[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 445-450.
[12]	KONG Yabin，SHEN Mingxue，ZHANG Zhinan，MENG Xiangkai，PENG Xudong.Thermal Characteristics of Reciprocating Friction of Rubber O-Ring Against Stainless Steel Surface[J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1352-1358.
[13]	LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin.Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing[J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388.
[14]	XU Jing, NI Jing, CHEN Yebo, JIN Yongtao, WU Can.Reciprocating Dynamic Friction Characteristics of the Micro-Gap of the Valve Sleeve and the Valve Core of the Pneumatic Control Valve[J]. Journal of Shanghai Jiao Tong University, 2019, 53(1): 118-.
[15]	LIU Jun,ZHANG Zhinan,XIE Youbai.Effect of Low Viscosity Oil and Surface Texture on Friction Characteristics of Piston Ring-Liner[J]. Journal of Shanghai Jiaotong University, 2018, 52(5): 505-510.