Effects of Double Ball Bar Setup Errors on Accuracy of Circular Tests of Machine Tools

Abstract

Abstract:

Abstract： To improve the circular test accuracy of double ball bar (DBB), the mechanism of DBB setup errors was studied and an identification and separation model was proposed. In the first place, based on the analysis of the geometric relationship of an arbitrary position in the process of measurement, the mathematical relationship between DBB measurement and setup errors was established. The distortion rule of measured values along with setup errors was obtained in mathematical simulation, and a new identification and separation method of setup errors was put forward. The simulation results prove that the proposed method can identify setup errors with high accuracy. The noncontact laser measurement results show that the proposed method can effectively identify DBB setup errors and significantly improve the accuracy of circular tests.

Key words:double ball bar(DBB),circular test,setup error,error identification,error separation

CLC Number:

TG 659

LU Hongxing,YANG Jianguo,XIANG Sitong. Effects of Double Ball Bar Setup Errors on Accuracy of Circular Tests of Machine Tools[J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1353-1358.

References

［1］Tsutsumi M, Tone S, Kato N, et al. Enhancement of geometric accuracy of fiveaxis machining centers based on identification and compensation of geometric deviations［J］. International Journal of Machine Tools and Manufacture, 2013,68:1120.

［2］Lee D M, Zhu Z, Lee K I, et al. Identification and measurement of geometric errors for a fiveaxis machine tool with a tilting head using a double ballbar［J］. International Journal of Precision Engineering and Manufacturing, 2011,12（2）:337343.

［3］Lee K I, Yang S H. Accuracy evaluation of machine tools by modeling spherical deviation based on double ballbar measurements［J］. International Journal of Machine Tools and Manufacture, 2013,75:4654.

［4］ISO 2304, Test code for machine tools. Part 4. Circular tests for numerically controlled machine tools［S］.

［5］Lee K I, Yang S H. Measurement and verification of positionindependent geometric errors of a fiveaxis machine tool using a double ballbar［J］. International Journal of Machine Tools and Manufacture, 2013,70:4552.

［6］Zargarbashi S H H, Mayer J R R. A model based method for centering double ball bar test results preventing fictitious ovalization effects［J］. International Journal of Machine Tools and Manufacture, 2005,45（10）:11321139.

［7］Kakino Y, Ihara Y, Nakatsu Y, et al. The measurement of motion errors of NC machine tools and diagnosis of their origins by using telescoping magnetic ball bar method［J］. CIRP Annals  Manufacturing Technology, 1987,36:377380.

［8］胡伟, 陈志俊, 刘国良, 等. 数控机床圆轨迹非接触式激光测量原理及应用［J］. 现代制造工程, 2007（1）:98100.

HU Wei, CHEN Zhijun, LIU Guoliang, et al. The structure and application of noncontact laser measurement for circular test of NC machine tools［J］. Modern Manufacturing Engineering, 2007（1）:98100.

［9］任永强, 杨建国, 刘国良, 等. 数控机床误差的圆轨迹运动激光非接触测量新方法［J］. 世界制造技术与装备市场, 2004(4):6164.

REN Yongqiang, YANG Jianguo, LIU Guoliang, et al. A new method of noncontact of laser measurement by circular contouring for NC machine tool accuracy［J］. World Manufacturing Engineering & Market, 2004(4):6164.

[1]	YANG Zhen,FU Zhuang,GUAN Enguang,XU Jiannan,TIAN Shihe,ZHENG Hui.The Kinematic Analysis and Structure Optimization of MLattice Modular Robot[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1153-1159.
[2]	ZHAO Jun1,YU Haidong2.Dynamic Analysis of TwoLink Flexible Manipulators Based on the Absolute Nodal Coordinate Formulation[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1160-1165.
[3]	ZHAO Ziren1,DU Shichang1,HUANG Delin1,REN Fei2,LIANG Xinguang2.Modelling and Bottleneck Analysis of Product Quality in Transient Phase of MultiStage Manufacturing Systems Based on Markovian Chains[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1166-1173.
[4]	HUANG Xuangui.Algorithm for Relatively Small Planted Clique with Small Edge Probability[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1202-1206.
[5]	LUO Jingjinga,YU Haidonga,ZHAO Chunzhanga,b,WANG Haoa,b.Study on Motion Stability of Variable CrossSection Flexible Beams Based on the Absolute Nodal Coordinate Formulation[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1174-1180.
[6]	WANG Yibo1,HUANG Yixiang1,LI Bingchu1,LING Xiao1 ZHAO Shuai1,LIU Chengliang1,ZHANG Daqing2.An Improved Modal Simulation Method for Switched Reluctance Motor Based on Static PreComputation[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1181-1188.
[7]	ZHOU Binghai,LI Ming.Scheduling Method of Manufacturing Cells with Robot Restricted Processing[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1214-1219.
[8]	CHEN Jinping1,ZHANG Shusheng1,HE Weiping1,WANG Mingwei1,HUANG Hui2.Feasible Change Path Search and Optimization Method Based on Driving Parameter Modeling[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1220-1227.
[9]	ZHOU Penghui,MA Hongzhan,CHEN Dongping,CHEN Mengyue,CHU Xuening.Identification of Product Redesign Modules Based on Fuzzy Random Failure Mode and Effects Analysis[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1189-1195.
[10]	PENG Cheng,ZHU Jianyun,CHEN Li.Mode Transition for a Hybrid Electric Vehicle Based on Model Reference Control[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1196-1201.
[11]	LIU Wei,YANG Chao .A Study on Injection Mould Part Quotation Model Based on Back Propagation Neural Network[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1207-1213.
[12]	CHEN Suting，WANG Zhuo，WANG Qi.Aerial Scene Classification Based on Nonlinear Scale Space[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1228-1234.
[13]	CHEN Ning,HE Xiaobin,GUI Weihua,YANG Chunhua.Research on Image Encryption System Based on Chaotic Discrete Sequence[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1273-1280.
[14]	LIU Kaia，ZHANG Liminb，ZHOU Lijuna.Design of Random Restricted Boltzmann Machine Group[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1235-1240.
[15]	ZHU Xinyao1，SONG Baowei2,XU Gang1,YANG Songlin1.Research on Landing Strategy and Influencing Factors of an Autonomous Underwater Vehicle with Supporting Mechanism[J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1241-1251.