Dynamic Modeling of Machine Tool Thermal Error Based on the State-Space Model

Abstract

Abstract:

A thermal error modeling method based on the state-space model was proposed, taking the temperature changes of the key heat sources as the input. Its output—thermal error of the machine tool, was jointly determined by the input, state variables and disturbances. Besides, a subspace identification algorithm was used to obtain the parameters of the model. To investigate its accuracy and robustness, experiments were conducted on a computer numerical control (CNC) machine tool. The result shows that the statespace model can compensate 70% of the thermal error regardless of the spindle speed conditions, and demonstrates its superiority in robustness in comparison with the modeling results of an auto- regressive model.

state-space model; computer numerical control (CNC) machine tool; thermal error; robustness

Key words:

state-space model, computer numerical control (CNC) machine tool, thermal error, robustness

CLC Number:

TH 161

XIAO Huixiao,YANG Jianguo,ZHANG Yi. Dynamic Modeling of Machine Tool Thermal Error Based on the State-Space Model[J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 22-26.

References

［1］Xu Z Z, Liu X J, Kim H K, et al. Thermal error forecast and performance evaluation for an aircooling ball screw system ［J］. International Journal of Machine Tools and Manufacture, 2011, 51(78): 605611.

［2］Li J W, Zhang W J, Tu S D, et al. Thermalerror modeling for complex physical systems: Thestateofarts review ［J］. The International Journal of Advanced Manufacturing Technology, 2009, 42(12): 168179.

［3］Li S H, Zhang Y Q, Zhang G X. A study of precompensation for thermal errors of NC machine tools ［J］. International Journal of Machine Tools and Manufacture, 1997, 37(12): 17151719.

［4］Yang H, Ni J. Dynamic modeling for machine tool thermal error compensation ［J］. Journal of Manufacturing Science and Engineering, 2003, 125(2): 245254.

［5］刘思峰, 邓聚龙. GM(1,1)模型的适用范围［J］. 系统工程理论与实践, 2000, 20(5):121124.

LIU Sifeng, DENG Julong. The range suitable for GM(1,1) ［J］. Systems Engineering Theory and Practice, 2000, 20(5):121124.

［6］Katayama T. Subspace methods for system identification ［M］. London: Springer, 2005: 831.

［7］杨华. 基于子空间方法的系统辨识及预测控制设计［D］. 上海：开云网页登录机械与动力工程学院, 2007.

［8］Ramesh R, Mannan M A, Poo A N. Thermal error measurement and modeling in machine tools. Part I. Influence of varying operating conditions［J］. Journal of Machine Tools and Manufacture, 2003, 43(4): 391404.

［9］凡志磊, 李中华, 杨建国. 基于偏相关分析的数控机床温度布点优化及其热误差建模［J］.中国机械工程, 2010, 21(17): 20252028.

FAN Zhilei, LI Zhonghua, YANG Jianguo. NC machine tool temperature measuring point optimization and thermal error modeling based on partial correlation analysis ［J］. China Mechanical Engineering, 2010, 21(17): 20252028.

[1]	ZHAO Liang,LEI Mohan,ZHU Xingxing,WANG Shuai,LING Zheng,YANG Jun,MEI Xuesong.A New Thermal Error Control Method for Spindle System of High Precision Computer Numerical Control Machine Tools[J]. Journal of Shanghai Jiaotong University, 2020, 54(11): 1165-1171.
[2]	TUO Zhanyu,HUANG Yiqiao,SHEN Muwen,YANG Jianguo.Modeling of Geometric and Thermal Complex Positioning Error of CNC Machine Tools Based on Cubic Spline Interpolation[J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 668-672.
[3]	YAO Xiaodong1,3,HUANG Yiqiao1,MA Xiaobo2,XUE bo3,YANG Jianguo1.Thermal Error Modeling and RealTime Compensation of CNC Machine Tools Based on Time Series Method[J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 673-679.
[4]	MA Chi,ZHAO Liang,MEI Xuesong,SHI Hu,YANG Jun.Thermal Error Modeling of Machine Tool Spindle Based on Particle Swarm Optimization and Neural Network[J]. Journal of Shanghai Jiaotong University, 2016, 50(05): 686-695.
[5]	MA Chi,YANG Jun,MEI Xuesong,ZHAO Liang,WANG Xinmeng,SHI Hu.Simulation of Thermal Behaviors of Motorized Spindle Based on Fractal Theory and Monte Carlo Method[J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1324-1331.
[6]	ZHAO Haitao1,FENG Wei1,ZHOU Hai1,YANG Jianguo2.Method for Selection of Temperature Key Points Based on Thermal Error Sensitivity Images and Genetic Optimization[J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 725-729.
[7]	WANG Wei,YANG Jianguo.Compound Error Compensation Technique for CNC Machine Tools Based on Interpolation Method[J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 12-21.
[8]	ZHU Xiaolong,YANG Jianguo,DAI Guisong.AVQ Clustering Algorithm and OIF-Elman Neural Network for Machine Tool Thermal Error[J]. Journal of Shanghai Jiaotong University, 2014, 48(1): 22-26.
[9]	YANG Jun,MEI Xuesong,ZHAO Liang,MA Chi,FENG Bin,SHI Hu.Thermal Error Modeling of a Coordinate Boring Machine Based on Fuzzy Clustering and SVM[J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1175-1182.
[10]	JIANG Hui,YANG Jianguo,LI Zihan,YAO Xiaodong.Application of Real Time Compensation with Combinative Thermal Error Prediction Model Based on Error Separation on CNC Machine Tools[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 744-749.
[11]	YANG Yi1，YAO Xiaodong1，YANG Jianguo1,ZHANG Yusheng2，YUAN Feng2.Thermo-Drifting Error Modeling of Spindle Based on Combination of Principal Component Analysis and BP Neural Network[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 750-753.
[12]	张毅,杨建国.Grey Neural Network Modeling for Machine Tool Thermal Error[J]. Journal of Shanghai Jiaotong University, 2011, 45(11): 1581-1586.
[13]	.Stepwise CoefficientsModifying Modeling of Thermal Errors of a CNC Machine Tool[J]. Journal of Shanghai Jiaotong University, 2011, 45(11): 1592-1596.