Unsteady Simulation of a Centrifugal Compressor with Holed Casing

Abstract

Abstract:Holed casing treatment was proposed for unshrouded centrifugal compressor and unsteady simulation was done in small flowrate condition near rotating stall. It was found that the pressure near the bleed port fluctuates in the tip region. The inlet flowrate of the compressor can be raised by the reinjected flow in the holes. A periodical excitation to the inlet flow of the compressor is also induced because of the space periodicity and time periodicity of the reinjected flow, and the flow in the tip region near the blade leading edge is periodic. The shear flow in the tip region of the compressor is improved and the flow in the tip clearance is interfered by holed casing treatment, and the stable working range of the compressor is expanded as a result.

Key words:holed casing treatment,centrifugal compressor,unsteady,numerical simulation

CLC Number:

TK 05

XU Wei, WANG Tong, DING Liang, GU Chuan-Gang. Unsteady Simulation of a Centrifugal Compressor with Holed Casing[J]. Journal of Shanghai Jiaotong University, 2012, 46(04): 536-539.

References

［1］Hartmann M J, Benser W A, Hauser C H. Fan and compressor technology［C］// The Proceedings of a Conference Held at NASA Lewis Research Center. Cleveland, Ohio, USA: Scientific & Technical Information,1970: 136.

［2］Takata H, Tsukuda Y. Stall margin improvement by casing treamentits mechanism and effectiveness［J］. J Eng Power, 1977, 99(1):121133.

［3］杜朝辉，姚吉先，忻建华. 一种求解带有机匣处理装置叶栅流场的数值方法［J］.开云网页登录学报, 1996, 30(8): 812.

DU Zhaohui, YAO Jixian, XIN Jianhua. A numerical calculation of cascade flowfields with casing treatment ［J］. Journal of Shanghai Jiaotong University, 1996, 30(8): 812.

［4］Wilke I, Kau H P. A numerical investigation of the flow mechanisms in a high pressure compressor front stage with axial slots［J］. J Turbomach, 2004, 126(3):339349.

［5］Huang X D, Chen H X, Shi K, et al. An analysis of the circumferential grooves casing treatment for transonic compressor flow［J］. Sci China Ser G, 2010, 53(2): 353359.

［6］Tuo W, Lu Y J, Yuan W, et al. Exprimental investigation on the effects of unsteady excitation frequency of casing treatment on transnic compressor performance［J］. J Turbomach, 2011, 133(2):021014.

［7］Hunziker R, Dickmann H P, Emmrich R. Numerical and experimental investigation of a centrifugal compressor with an inducer casing bleed system ［J］. Proc Instn Mech Engrs， 2001, 215(6): 783791.

［8］Xiao J, Xu W, Gu C G, et al. SelfRecirculating casing treatment for a radial compressor［J］. Chinese Journal Of Mechanical Engineering, 2009, 22(4):567573.

［9］Mohtar H, Chesse P, Chalet D. Effect of a map width enhancement system on turbocharger centrifugal compressor performance and surge margin［J］. Proc Instn Mech Engrs，2011, 225(3): 395405.

［10］Ishida M, Surana T, Ueki H, et al. Suppression of unstable flow at small flow rates in a centrifugal blower by controlling tip leakage flow and reverse flow［J］. J Turbomach, 2005, 127(1):7683.

[1]	DING Enbao, CHANG Shengming, SUN Cong, ZHAO Leiming, WU Hao.Hydrodynamic Characteristics of a Surface Piercing Propeller Entering Water with Different Radiuses[J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1188-1198.
[2]	WU Huaina, FENG Donglin, LIU Yuan, LAN Ganzhou, CHEN Renpeng.Anti-Uplift Portal Frame in Control of Underlying Tunnel Deformation Induced by Foundation Pit Excavation[J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1227-1237.
[3]	LIU Jinhao, YAN Yuanzhong, ZHANG Qi, BIAN Rong, HE Lei, YE Guanlin.Centrifugal Test and Numerical Analysis of Impact of Surface Surcharge on Existing Tunnels[J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 886-896.
[4]	CHEN Yonglin (陈永霖), YANG Weidong (杨伟东), XIE Weicheng (谢炜程), WANG Xiaoliang (王晓亮), FU Gongyi∗ (付功义).Meso-Scale Tearing Mechanism Analysis of Flexible Fabric Composite for Stratospheric Airship via Experiment and Numerical Simulation[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 873-884.
[5]	SUN Jian, PENG Bin, ZHU Bingguo.Numerical Simulation and Experimental Study of Oil-Free Double-Warp Air Scroll Compressor[J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 611-621.
[6]	LI Jia, LI Huacong, WANG Yue.Transient Characteristics of a High-Speed Aero-Fuel Centrifugal Pump in Variable Gas-Liquid Ratio Conditions[J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 622-634.
[7]	XU Huilia (许慧丽), ZOU Zaojiana,b∗ (邹早建).Numerical Simulation of the Flow in a Waterjet Intake Under Different Motion Conditions[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(3): 356-364.
[8]	WANG Fangjian, SONG Yuhui, LIU Jin, QIN Han, CHEN Lan.Aerodynamics Characteristics of Slender Body at Extra-wide Range of Angle of Attack in Subsonic and Transonic Speed[J]. Air & Space Defense, 2022, 5(3): 27-37.
[9]	QIN Han, WU Bin, SONG Yuhui, LIU Jin, CHEN Lan.Numerical Analysis of Support Interference for a Slender Configuration at Super Large Angles of Attack in High Speed Wind Tunnel[J]. Air & Space Defense, 2022, 5(3): 44-51.
[10]	XUE Fei, WANG Yuchao, WU Bin.Study on Backward Separation Characteristics of High-Speed Air Vehicle[J]. Air & Space Defense, 2022, 5(3): 80-86.
[11]	ZHENG Gaoyuan, ZHAO Yixi, CUI Junhui.Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body[J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 53-61.
[12]	ZHOU Yu, ZHAO Yong, YU Zhongqi, ZHAO Yixi.Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs[J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 62-69.
[13]	JIN Ge, FAN Min, ZHOU Zhendong, TAN Yong, ZHONG Xiaobo.Analysis and Improvement of Dynamic Characteristics of Lift Check Valves[J]. Journal of Shanghai Jiao Tong University, 2021, 55(S2): 110-118.
[14]	XU Dehui, GU Hanyang, LIU Li, HUANG Chao.Thermal Experimental and Numerical Study on Performance of a Novel Conical Swirl-Vane Steam Separator[J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1087-1094.
[15]	LIU Heng, WU Rui, SUN Shuo.Numerical Simulation of Propeller Cavitation in Non-Uniform Flow[J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 976-983.