Features Combined Classification of Cavitation in Waterjet Pumps

Abstract

Abstract:Onboard experiments were carried out when the waterjet pumps are working on the conditions of none cavitation zone, cavitation zone Ⅰand cavitation zone Ⅱ, acoustic and vibration signals were acquired respectively by hydrophones mounted in the inspection holes and acceleration transducers mounted on the case of the waterjet pumps. It showed that both of the second derivatives of the acoustic and vibration signals have notable differences before and after cavitation, and visible peak values appear in 8-25 kHz of acoustic signal and 3-12 kHz of vibration signal after cavitation. Cavitation feature sets were constituted based on the peak series of the second derivatives for features combined classification. The results show that the three types signals can be distinguished well by features combined classification, and the effect of multi-sensors features combined classification is better than that of single-sensor, especially the effect of multi-sensors features combined classification based on high order derivative is more perfect.

Key words:waterjet pump,cavitation,feature sets,combined,classification

CLC Number:

TH311

DUAN Xiang-Yang, WANG Yong-Sheng, SU Yong-Sheng. Features Combined Classification of Cavitation in Waterjet Pumps[J]. Journal of Shanghai Jiaotong University, 2011, 45(09): 1322-1326.

References

［1］吴梵, 陈昕. 喷水推进装置及其在舰艇上的应用［J］. 海军工程大学学报, 2003, 15(6): 4448.

WU Fan, CHEN Xin. Waterjet propulsion equipment and its application on warships［J］. Journal of Naval University of Engineering, 2003, 15(6):4448.

［2］Bulten N W H. Numerical analysis of a waterjet propulsion system［D］. Netherlands: Eindhoven University of Technology, 2006.

［3］刘承江, 王永生, 丁江明. 喷水推进研究综述［J］. 船舶工程, 2006,28(4):4952.

LIU Chengjiang, WANG Yongsheng, DING Jiangming. Overview of study of waterjet propulsion［J］. Ship Engineering, 2006, 28(4): 4952.

［4］Escaler X, Egusquiza E, Farhat M, et al. Detection of cavitation in hydraulic turbines［J］. Mechanical Systems and Signal Processing, 2006, 20(4): 9831007.

［5］段向阳, 王永生, 苏永生. 水力机械空化（汽蚀）监测研究综述［J］. 水泵技术, 2008(5): 16.

DUAN Xiangyang, WANG Yongsheng, SU Yongsheng. Overview of study of cavitation monitoring in turbomachine［J］. Pump Technology, 2008(5): 16.

［6］何杰, 王永生, 丁江明, 等. 喷水推进泵空化预测原理和方法的研究［J］. 中国修船, 2006,19(2): 2426.

HE Jie, WANG Yongsheng, DING Jiangming, et al. Research on the principle and approach of monitoring cavitation in waterjet propulsion system［J］. China Ship Repair, 2006,19(2): 2426.

［7］段向阳, 王永生, 苏永生, 等. 喷水推进器空化监测技术研究［J］. 舰船科学技术, 2009,31(5):3941.

DUAN Xiangyang, WANG Yongsheng, SU Yongsheng, et al. Research on monitoring techniques of waterjet cavitation［J］. Ship Science and Technology，2009, 31(5): 3941.

［8］Schreiera P J, Scharf L L. Higherorder spectral analysis of complex signals［J］. Signal Processing, 2006, 86(11): 33213333.

［9］Teder L, Pappel T. Detection of cavitation in pumps through higher order derivatives［C］//The 4th International DAAAM Conference. Tallinn, Estonia: DAAAM Estonia, 2004.

[1]	FU Wenhao, JIANG Pingping, YAN Guozheng, PENG Yuqi, FEI Qian, ZHUANG haoyu.Design and Implementation of a New Type of Gastrointestinal Robot Wireless Power Transmission System[J]. Journal of Shanghai Jiao Tong University, 2022, 56(8): 1057-1066.
[2]	NI Yangfan, YANG Yuanyuan, XIE Zhe, ZHENG Dezhong, WANG Weidong.Multi-Feature Extraction of Pulmonary Nodules Based on LSTM and Attention Structure[J]. Journal of Shanghai Jiao Tong University, 2022, 56(8): 1078-1088.
[3]	WU Caiyu, (吴彩钰), SABOR Nabil, ZHOU Shihong, (周世鸿), WANG Min, (王敏), YING Liang (应亮), WANG Guoxing∗ (王国兴).Gram Matrix-Based Convolutional Neural Network for Biometric Identification Using Photoplethysmography Signal[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 463-472.
[4]	TUNG Hao (董昊), ZHENG Chao (郑超), MAO Xinsheng(毛新生), QIAN Dahong (钱大宏).Multi-Lead ECG Classification via an Information-Based Attention Convolutional Neural Network[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(1): 55-69.
[5]	WU Tao, MO Shixu, XIANG Yongbin, ZOU Zequn, ZHENG Yan.Explicit Buckling Analysis of Rotationally Restrained Plates on Rigid Base Under Various Loading Conditions[J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 114-126.
[6]	LIU Heng, WU Rui, SUN Shuo.Numerical Simulation of Propeller Cavitation in Non-Uniform Flow[J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 976-983.
[7]	LUO Huimiao (罗晖淼), ZHAO Dongbiao∗ (赵东标), FU Wenqiang (付文强).Speed Planning Algorithm Based on Improved S-Type Acceleration and Deceleration Model[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 786-793.
[8]	HE Xinlin, QI Zongfeng, LI Jianxun.Unbalanced Learning of Generative Adversarial Network Based on Latent Posterior[J]. Journal of Shanghai Jiao Tong University, 2021, 55(5): 557-565.
[9]	LI Fen, ZHOU Erchang, SUN Gaiping, BAI Yongqing, TONG Li, LIU Bangyin, ZHAO Jinbin.A Novel Weather Classification Method and Its Application in Photovoltaic Power Prediction[J]. Journal of Shanghai Jiao Tong University, 2021, 55(12): 1510-1519.
[10]	XU Ye, XIONG Ying, HUANG Zheng.Test and Numerical Study of Propeller Cavitation Induced Fluctuating Pressure of Twin-Propeller Ship[J]. Journal of Shanghai Jiaotong University, 2020, 54(8): 831-838.
[11]	LIU Aiguo, CHEN Xuanren, YANG Yudong, CHEN Lei, WANG Chengjun.Influence of Fuel-Staging Ratio on Combustion Performance of Dual Fuel Combustor[J]. Journal of Shanghai Jiaotong University, 2020, 54(7): 756-764.
[12]	MOU Jiegang, ZHANG Zicheng, GU Yunqing, SHI Zhengzan, ZHENG Shuihua.Effect of Circular Non-Smooth Surface Blades on Cavitation Characteristics of Centrifugal Pump[J]. Journal of Shanghai Jiaotong University, 2020, 54(6): 577-583.
[13]	DING Shifeng, ZHOU Li, WANG Zhengrong, TSUPRIK Vladimir G..Prediction Method of Ice Resistance and Propulsion Power for Polar Ships[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 739-745.
[14]	WANG Shengsheng, ZHANG Hang, CHEN Juan .Dual Sum-Product Networks Autoencoder for Multi-Label Classification[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 665-673.
[15]	MENG Lingtong, JIANG Zuhua, TAO Ningrong, LIU Jianfeng, ZHENG Hong.Multi-Stockyard Scheduling Considering Technological Process and Combined Assembly Block[J]. Journal of Shanghai Jiao Tong University, 2020, 54(4): 331-343.